What causes a peanut butter grinding machine fail to produce liquid peanut butter

Time：2022-03-15 22:47 Views：

peanut butter grinding machine use steps：
1.Check the appearance, funnel, circulating pipe, motor and base of peanut butter grinding machine for deformation, obvious scratches or collision points
2.Connect the funnel, circulating pipe and discharge port of peanut butter grinding machine to check whether it is loose or not
3.Adjust the grinding disc clearance of peanut butter grinding machine, turn the dial of peanut butter grinding machine by hand, and check whether the dial can adjust the fineness of grinding head normally
4.Start the peanut butter grinding machine, use water as the medium to test the machine, and check whether the peanut butter grinding machine can operate normally
5.Drain the water from the outlet and the commissioning is completed

Precautions for using peanut butter grinding machine operation：
1.Connect the feed hopper or feed pipe, discharge port, or discharge circulating pipe. Connect the cooling water pipe and drain pipe.
2.Install the power starter, equipped with ammeter and indicator light. After the power supply is connected, start the machine and judge the direction of the motor. The direction from the feed inlet should be clockwise.
3.Adjust the clearance between the grinding discs, loosen the two handles (counterclockwise), then turn the adjusting ring clockwise, extend one hand into the square mouth of the base and rotate the motor fan blade. When there is a
little friction when rotating the adjusting ring, it will stop immediately. Then reverse the adjusting ring a little to make the grinding clearance greater than the alignment number. Generally, make the grinding clearance pin as large as
possible under the condition of meeting the fineness requirements of processing materials. This can make the service life of the grinding disc longer. Then tighten the handle clockwise to lock the adjusting ring to fix the grinding disc
gap.
4.Thoroughly disinfect and clean the inside of the body.
5.Turn on the cooling water and start the peanut butter grinding machine. Feed the material into the grinding machine immediately after it operates normally. The empty train shall not run for more than 15 seconds.
6.Quartz, broken glass, metal chips and hard materials are not allowed to be mixed into the processing materials, otherwise the dynamic and static grinding plates will be damaged.
7.Pay attention to the motor load. If overload is found, reduce the feeding.
8.The peanut butter grinding machine is a high-precision machine with very small grinding clearance and high running speed. The operator should strictly abide by the post and operate according to the rules. In case of any fault, stop the
machine in time and reuse it after troubleshooting.
9.After using the peanut butter grinding machine, it shall be thoroughly cleaned to prevent materials from remaining in the machine, so as to avoid leakage caused by mechanical seal bonding.

label：

Leave Message

HOT

2024-09-07 Intelligent Orange Fruit Sorting Grading Classifying Machine Fruit Sorting Grading Machine
2024-07-18Multi Functional Movable Sawdust Garden Tree Root Crusher Wood Edge Cutting Machine
2024-03-07Feed Making Machine In American
2024-03-01Cattle Feed Grinder Machine Price
2024-01-28Feed Pellet Machine Instructions
2024-01-28Feed Pellet Machine Purchase Guide

About

Products: Fruit Vegetable; Agricultural Machine; Auxiliary Equipment; Packaging Machine; Nut Machine

Blog: Technical literature; Product knowledge; Toothpick News; Company News

: WeChat

Contact

phone：0086-18503860088
Tel：0086-18503860088
WhatsApp：0086-18503860088
Email：info@everfitfm.com
Add：Zhengdong New District of Zhengzhou City

X

Everfit Food Machine - Your trustworthy business partner！

截屏，微信识别二维码

微信号：0086-18503860088

（点击微信号复制，添加好友）

打开微信

微信号已复制，请打开微信添加咨询详情！